Administration: Discovery
Configuring LLDP
113 Cisco Small Business 300 Series Managed Switch Administration Guide
8
STEP 1 Click Administration > Discovery - LLDP > LLDP Statistics.
For each port, the fields are displayed:
•Interface—Identifier of interface.
•Tx Frames Total—Number of transmitted frames.
•Rx Frames
-

Tot a l

—Number of received frames.
-

Discarded

—Total number of received frames that were discarded.
-

Errors

—Total number of received frames with errors.
•Rx TLVs
-

Discarded

—Total number of received TLVs that were discarded.
-

Unrecognized

—Total number of received TLVs that were unrecognized.
•Neighbor’s Information Deletion Count—Number of neighbor ageouts on
the interface.
STEP 2 Click Refresh to view the latest statistics.
LLDP Overloading
LLDP adds information as LLDP and LLDP-MED TLVs into the LLDP packets. LLDP
overload occurs when the total amount of information to be included in a LLDP
packet exceed the maximum PDU size supported by an interface.
The LLDP Overloading page

displays the number of bytes of LLDP/LLDP-MED
information, the number of available bytes for additional LLDP information, and the
overloading status of every interface.
To view LLDP overloading information:
STEP 1 Click Administration > Discovery - LLDP > LLDP Overloading.
This page contains the following fields for each port:
•Interface—Port identifier.
•Tota l ( By tes )—Total number of bytes of LLDP information in each packet