Cisco Systems Dependencies Between Features, Default Settings and Configurations

IP Configuration
DHCP Server
Cisco Small Business 300 Series Managed Switch Administration Guide 278
16
Dependencies Between Features
•A single interface cannot be configured as both a DHCPv4 client and
DHCPv4 server at the same time.
•If DHCPv4 Relay is enabled, the device cannot be configured as a DHCP
server.
Default Settings and Configurations
•The device is not configured as a DHCPv4 server by default.
•If the device is enabled to be a DHCPv4 server, there are no network pools
of addresses defined by default.
Workflow for Enabling Feature
To configure the device as a DHCPv4 server:
STEP 1 Enable the device as a DHCP server using the DHCP Server > Properties page.
STEP 2 If there are any IP addresses that you do not want to be assigned, configure them
using the Excluded Addresses page.
STEP 3 Define up to 8 network pools of IP addresses using the Network Pools page.
STEP 4 Configure clients that will be assigned a permanent IP address, using the Static
Hosts page.
55 Parameter
Request List
Created by the DHCP client.
56 Message Contains error text.
58 Renewal (T1) Time
Value
Hard-coded.
59 Rebinding (T2)
Time Valu e
Hard-coded.
61 Client-identifier Created by the DHCP client using sysName.
Option # Option Name Description