Quality of Service
Managing QoS Statistics
441 Cisco Small Business 300 Series Managed Switch Administration Guide
22
Policer Statistics
A Single Policer is bound to a class map from a single policy. An Aggregate Policer
is bound to one or more class maps from one or more policies.

Viewing Single Policer Statistics

The Single Policer Statistics page indicates the number of in-profile and out-of-
profile packets that are received from an interface that meet the conditions
defined in the class map of a policy.
NOTE This page is not displayed when the device is in Layer3 mode.
To view policer statistics:
STEP 1 Click Quality of Service > QoS Statistics > Single Policer Statistics.
This page displays the following fields:
•Interface—Statistics are displayed for this interface.
•Policy—Statistics are displayed for this policy.
•Class Map—Statistics are displayed for this class map.
•In-Profile Bytes—Number of in-profile bytes recei ved.
•Out-of-Profile Bytes—Number of out-profile bytes received.
STEP 2 Click Add.
STEP 3 Enter the pa rameters.
•Interface—Select the interface for which statistics are accumulated.
•Policy Name—Select the policy name.
•Class Map Name—Select the class name.
STEP 4 Click Apply. An additional request for statistics is created and the Running
Configuration file is updated.