Cisco Systems Workflow2: To configure an interface as a static Smartport, perform the following step s:

Smartport
Common Smartport Tasks
157 Cisco Small Business 300 Series Managed Switch Administration Guide
10
STEP 4 Click Apply
STEP 5 To enable the Auto Smartport feature on one or more interfaces, open the
Smartport > Interface Settings page.
STEP 6 Select the interface, and click Edit.
STEP 7 Select Auto Smartport in the Smartport Application field.
STEP 8 Check or uncheck Persistent Status if desired.
STEP 9 Click Apply.
Workflow2: To configure an interface as a static Smartport, perform the
following step s:
STEP 1 To enable the Smartport feature on the interface, open the Smartport > Interface
Settings page.
STEP 2 Select the interface, and click Edit.
STEP 3 Select the Smartport type that is to be assigned to the interface in the Smartport
Application field.
STEP 4 Set the macro parameters as required.
STEP 5 Click Apply.
Workflow3: To adjust Smartport macro parameter defaults and/or bind a
user-defined macro pair to a Smartport t ype, perform the following
steps:
Through this procedure you can accomplish the following:
•View the macro source.
•Change parameter defaults.
•Restore the parameter defaults to the factory settings.
•Bind a user-defined macro pair (a macro and its corresponding anti-macro)
to a Smartpor t type.
1. Open the Smartport > Smartport Type Settings page.
2. Select the Smartport Type.