Cisco Systems uBR10-LCP2-MC28C manual Status, Description

Cisco uBR10-LCP2-MC28C Overview

Table 2	Cisco uBR10-LCP2 Adapter Card LEDs and Their Functions
LED		Status	Description
Power		Green	Power is being supplied to the Cisco uBR10-LCP2.
		Off	Power is off.
Status		Yellow	The Cisco uBR10-LCP2 adapter card is in the bootup
			process, self test, or downloading code.
		Green	The Cisco uBR10-LCP2 adapter card has
			successfully completed the boot, self test. and code
			download process.
Status LED on N+1 or		Blinking Green	The board is in Standby or Protect card mode.
redundant card in chassis
Maintenance		Off	Normally off to indicate that there is no maintenance
			action is required.
		Yellow	It is safe to remove the entire assembly from the
			chassis (Cisco uBR10-LCP2 adapter card and Cisco
			uBR10-MC28C cable interface line card).

The Cisco uBR-MC28C cable interface line card has its own set of LEDs. Table 3 describes the LEDs and their functions:

Table 3	Cisco uBR-MC28C Cable Interface Line Card LEDs and Their Functions
LED		Status	Description
Enables		Green	Indicates that the cable interface line card is operating
			normally, receiving DC power from the router
			midplane, and configured for operation.
		Off	Either the card is shut down or the slot is not working.
Upstream		Green	For each upstream port, indicates that the upstream
			path is enabled and configured.
		Off	Either the port is not properly configured, or is shut
			down, or the slot is not working.
Downstream		Green	For each downstream port, indicates that the
			downstream path is enabled and configured.
		Off	Either the port is not properly configured, or is shut
			down, or the slot is not working.

Cisco uBR10-LCP2-MC28C Cable Interface Line Card for the Cisco uBR10012 Router

6 OL-4653-01