Cisco Systems UCS C220 M3, A03D1TBSATA manual RAID Summary, Low-Voltage Dimm Considerations

Models: A03D1TBSATA UCS C220 M3

1 64
Download 64 pages 32.23 Kb
Page 54
Image 54

SUPPLEMENTAL MATERIAL

Low-Voltage DIMM Considerations

The C220 M3 server can be ordered with dual-voltage (1.5/1.35 V) DIMMs only. Note the following considerations:

Low-voltage DIMMs within the server must have the identical manufacturer, type, speed, and size.

Low-voltage DIMMs and standard-voltage DIMMs can be mixed in the same server. Note that this causes the system BIOS to default to standard-voltage operation (Performance Mode). That is, the server cannot operate in Power Saving Mode unless all DIMMs are low-voltage DIMMs.

CPUs that have a maximum memory frequency less than 1333 MHz support low-voltage DIMMs operating in Power Saving Mode only, and do not support Performance Mode.

RAID Summary

The C220 M3 SFF server has an 8-drive backplane.

ROM5 and ROM55 embedded RAID upgrade options support up to 8 drives

Mezzanine card (UCSC-RAID-11-C220) supports up to 8 drives

Mezzanine card (UCSC-RAID-MZ-220) supports up to 8 drives

SAS 9266-8i and SAS 9266CV-8i PCIe cards support up to 8 drives

NOTE: If you do not select a mezzanine card, a plug-in PCIe RAID card, or one of the embedded RAID upgrade options, you will have an embedded SATA-only RAID controller that supports up to four SATA-only drives (RAID 0, 1, 10)

54

Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)

Page 54
Image 54
Cisco Systems UCS C220 M3, A03D1TBSATA manual RAID Summary, Low-Voltage Dimm Considerations