Cisco Systems UCS C220 M3 Order Optional Network Card Accessories, Choose Optional Twinax Cables

CONFIGURING the SERVER

STEP 7 ORDER OPTIONAL NETWORK CARD ACCESSORIES

Copper twinax cables and SFP optical modules may be ordered to support the two-port network cards that are available with the server.

Choose Optional Twinax Cables

Table 10 lists the copper twinax cables available for the PCIe cards. You can choose cable lengths of 1, 3, 5, 7, or 10 meters. The two longer cables (7 and 10 meters) are active, which means that they contain active components within the SFP+ housing to improve signal quality.

Table 10 Available Twinax Cables

Product ID (PID) PID Description

SFP-H10GB-CU1M SFP-H10GB-CU3M SFP-H10GB-CU5M SFP-H10GB-ACU7M SFP-H10GB-ACU10M

10GBASE-CU SFP+ Cable (1 M)

10GBASE-CU SFP+ Cable (3 M)

10GBASE-CU SFP+ Cable (5 M)

10GBASE-CU SFP+ Cable (7 M)

10GBASE-CU SFP+ Cable (10 M)

Approved Configurations

(1)Choose Up to Two Twinax Cables for Each Network Card Ordered

■You may choose one or two twinax cables for each network card ordered. The cables can be different lengths; however, you would normally order two cables of equal lengths to connect to the primary and redundant network switching equipment.

Caveats

The twinax cables listed in Table 10 can be ordered only for the following PCIe cards:

—N2XX-ACPCI01 (Cisco UCS P81E Virtual Interface Card/ 2-port 10Gbps)

—UCS-PCIE-BSFP (Broadcom 57712)

—N2XX-AEPCI01 (Emulex OCe10102-F)

—N2XX-AIPCI01 (Intel Dual Port Ethernet X520)

—UCSC-PCIE-CSC-02 (Cisco VIC 1225 Dual Port 10Gb SFP+ CNA)

26 Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)