Cisco Systems A03D1TBSATA Capability/Feature Description, UCSC-RAID-MZ-220, Drives can be mixed

BASE SERVER STANDARD CAPABILITIES and FEATURES

Capability/Feature	Description
Storage controller	■ Embedded RAID (3 Gbs)
	• Embedded SATA-only RAID controller, supporting up to 4 SATA-only
	drives (RAID 0, 1, 10)
	• ROM5 embedded RAID upgrade, supporting up to 8 SAS/SATA drives
	(RAID 0, 1, 10). SAS and SATA drives can be mixed.
	• ROM55 embedded RAID upgrade, supporting up to 8 SAS/SATA drives
	(RAID 0, 1, 10, 5). SAS and SATA drives can be mixed.
	■ 2008M-8i Mezzanine Cards (6 Gbs) - two versions
	• Cisco UCSC RAID SAS 2008M-8i Mezzanine Card, supporting up to 8
	SAS/SATA drives supporting RAID 0, 1, 10, 5, and 50. SAS and SATA
	drives can be mixed. This card has a product ID (PID) of
	UCSC-RAID-11-C220.
	• Cisco UCSC RAID SAS 2008M-8i Mezzanine Card, supporting up to
	eight SAS/SATA drives supporting RAID 0, 1, and 10. SAS and SATA
	drives can be mixed. This card has a product ID (PID) of
	UCSC-RAID-MZ-220.
	■ Plug-in PCIe Cards (6 Gbs)
	• LSI MegaRAID SAS 9266-8i 8-port plug-in PCIe RAID RAID controller
	card (occupies a half-height PCIe slot), supporting RAID levels 0, 1,
	10, 5, 6, 50, 60 and up to 8 internal SAS or SATA drives. SAS and SATA
	drives can be mixed.
	• LSI MegaRAID SAS 9266CV-8i RAID 8-port PCIe plug-in RAID controller
	card, supporting RAID 0, 1, 10, 5, 6, 50, and 60 and up to eight
	internal SAS or SATA drives. SAS and SATA drives can be mixed.
Interfaces	■ Rear panel
	• One RJ45 serial port connector
	• Two USB 2.0 port connectors
	• One DB15 VGA connector
	• Two RJ-45 10/100/1000 Ethernet port connectors
	• One RJ-45 10/100/1000 Ethernet management port, using Cisco
	Integrated Management Controller (CIMC) firmware
	■ Various PCIe card ports (dependent on which cards are installed)
	• Converged Network Adapter (CNA) ports
	• Network Interface Card (NIC) ports
	• Host Bus Adapter (HBA) ports
	■ Front panel
	• One KVM console connector (supplies two USB, one VGA, and one
	serial connector)
Front Panel	A front panel controller provides status indications and control buttons
Power subsystem	Up to two 450 W 650 W power supplies. One is mandatory; one more can be
	added for 1 + 1 redundancy.

Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model) 7