Citizen CBM-270 user manual Operation Panel and Display of Error, Error Details, Off, Busy

CBM-270 User’s Manual

4.11Operation Panel and Display of Error

1.POWER lamp (Green)

Illuminated if the power is turned on.

2.ERROR lamp (Red), PAPER lamp (Red)

Indicates an error by illuminating or blinking the lamps.

	Error			Display				Reset
			ERROR Lamp		PAPER Lamp
	Memory check error		Quick blinking		OFF		Cannot be reset
	Head-up			ON	OFF		Lower the head-up lever.
	Head overheat			ON	OFF		Automatically		reset	by	a
							temperature drop
	Paper near end			OFF	ON		Set a new paper roll after a
							print stop.
	Paper end			OFF	ON		Set a new paper roll.
	Macro execution wait		Slow blinking		OFF		Press the FEED switch.
	Label paper cut wait			OFF	Slow blinking		Press the FEED switch.
	Label paper error			ON	ON		Set the label		paper	suitable
							for the specifications.
<Error Details>
	Head-up	----- Occurs when the head-up lever is raised.						The printer cannot feed the
			paper or print. The parallel interface outputs BUSY and FAULT, and
			serial interface DTR, respectively.
	Head overheat	----- If the temperature of the printing head rises (About 60°C or more), in
			order to protect it against overheating, a printing head temperature
			sensor will be activated to stop printing. The parallel interface outputs
			BUSY	and FAULT,	and serial	interface		DTR, respectively.			If the
			temperature drops (About 55°C), printing will be automatically resumed.
	Paper near end	----- If the diameter of the paper roll decreases, the paper near end sensor will
			react to inform you that the paper roll is running out. See "4.8 Paper
			Near End Function".
	Paper end	----- If the paper roll runs out, the paper sensor near the printing head will
			react to stop printing. See "4.7 Paper End Function".
	Label paper error	----- Occurs if you set the thermal paper or non-specified label paper, when the
			label paper has been selected. The parallel interface outputs BUSY and
			FAULT, and serial interface DTR, respectively.

3.FEED switch

See "4.6 FEED Switch Function."

30 CITIZEN