GS C0 | m n |
|
[Function] | Setting the numbering print mode | |
[Code] | <1D>H<43>H<30>H<m><n> |
|
[Range] | 0 £ m £ 5 |
|
| 0 £ n £ 5 |
|
[Outline] | This command sets the numbering (serial number counter) print mode. m | |
| denotes the number of print columns. | |
m = 0 | Prints the digits indicated by a numeral. In this case, n has no meaning. | |
m = 1 to 5 | Indicates the maximum number of columns to be printed. If a counter value is | |
| larger than this the number of columns set with this command, the printer will | |
| print the lower | |
| n specifies a printing position within the printing columns. | |
n = 0 | Prints the data right justified. The blank columns are spaced. | |
n = 1 | Prints the data right justified. | The blank columns are filled with "0". |
n =2 | Prints the data left justified. | The right blank columns are spaced. |
[Caution] | If either m or n has a value beyond their ranges, that setting will become invalid. | |
[See Also] | GS C1, GS C2, GS c, GS C |
|
[Default] | m = 0, n = 0 |
|
[Sample Program] |
| |
| LPRINT CHR$ (&H1D) ; "C0" ; | * CNT |
| LPRINT CHR$ (0) ; CHR$ (0) ; | FOR I=1 TO 5 |
| GOSUB * CNT | LPRINT CHR$ (&HID) ; "c" ; |
| LPRINT CHR$ (&H1D) ; "C0" ; | NEXT I |
| LPRINT CHR$ (1) ; CHR$ (0) ; | LPRINT CHR$ (&HA) ; |
| GOSUB * CNT | RETURN |
| LPRINT CHR$ (&H1D) ; "C0" ; |
|
LPRINT CHR$ (3) ; CHR$ (0) ;
GOSUB * CNT
LPRINT CHR$ (&H1D) ; "C0" ;
LPRINT CHR$ (3) ; CHR$ (1) ;
GOSUB * CNT
LPRINT CHR$ (&H1D) ; "C0" ;
LPRINT CHR$ (3) ; CHR$ (2) ;
GOSUB * CNT
END
[Print Result]
Counts from 1 to 5 at m = 0 and n = 0. Counts from 6 to 10 at m = 1 and n = 0. Counts from 11 to 15 at m = 3 and n = 0. Counts from 16 to 20 at m = 3 and n = 1. Counts from 21 to 25 at m = 3 and n =2.
84 | CITIZEN |
