Citizen CBM-270 user manual GS a m Only When Label Printer is Selected

CBM-270 User’s Manual

GS <	(Only When Label Printer is Selected)
[Function]	Initializing the printer mechanism
[Code]	<1D>H<3C>H
[Outline]	This command initializes the printer mechanism.
[Caution]	This command is valid only when the label printer is selected with DS1-5. Since
	it uses one label for scanning, a head search starts from the next label. The
	maximum label length and label spacing (Black mark) is 300 mm. Any label
	exceeding this limit results in an error.

GS A m	n	(Only When Label Printer is Selected)
[Function]	Correctting the label top position
[Code]	<1D>H<41>H<m><n>
[Range]	0 £ m £ 255, 0 £ n £ 10
[Outline]	This command sets the label head search position in terms of correction value for
	the default position. m denotes the correcting direction and valid only for the
	least significant bit (m0).
	m 0	Correcting direction
	0	Corrects in the forward direction
	1	Corrects in the reverse direction
	n denotes a correction value; it is set in increments of n/203 inch.
[Caution]	This command is valid only when the label printer is selected with DS1-5. The
	correction value remains valid until it is re-set with this command or the power is
	turned on again. Any setting beyond the range is ignored.

88 CITIZEN