iDP3310 User's Manual
2.3Paper Specifications
2.3.1Recommended Paper
∙ | Type | : | Thermal paper |
∙ | Paper width | : 80 plus 0/minus 1 mm | |
∙ | Paper thickness | : 60∼90μm | |
∙ | Roll diameter | : | φ80mm or less |
∙ | Printed surface | : Outside of the roll (Surface) | |
∙ | Recommended paper | : | |
∙ | Core | : | φ12mm (Inner diameter) |
CAUTION : ∙ Print quality may vary if you use paper other than specified.
In such case, change print density by dip switch setting.
(See “5. Dip Switch Setting”)
∙Do not paste the paper to the core.
∙Chemicals or oil may change the color of paper, or printed characters may be vanished.
∙Thermal paper color may be changed if scratched with a nail or something sharp.
∙Change of paper color starts at approx. 70°C. Pay attention to heat, humidity and sun light.
2.3.2 Print Position
5 | CITIZEN |
