Citizen iDP3310 manual Esc

	iDP3310 User's Manual
ESC i	P-250,P-900R
[Function]	Identify Printer
[Code]	<1B>H<69>H
[Outline]	This command sends a printer identification code by 1 byte. It sends "A"(<41>H) in the P-
	250 mode and "H"(<48>H) in the P-900R mode.
[Caution]	This command is available only serial interface in the P-250 mode and P-900R mode.
ESC x	ALL
[Function]	Select P-900R Mode
[Code]	<1B>H<78>H
[Outline]	The command or function following this command works as the P-900R mode.
[Caution]	This command can be canceled by the FS, GS, or ESC c command.
[See Also]	FS, GS, ESC c
	Differences from P-250 mode
	* If the paper end is detected with the serial interface, "#"(<23>H) will be sent every second.
	If the paper end error is reset, sending will stop.
	* With the ESC i command(Identify Printer), the one-byte transmitted character will be
	"H"(<48>H).

47 CITIZEN