Citizen iDP3310 manual Us, So, Si

	iDP3310 User's Manual
RS	ALL
[Function]	Set Double-Width Character
[Code]	<1E>H
[Outline]	This command prints its subsequent characters in double width. If a line has a position only
	for one character, it will be printed in normal width.
	This attribute remains valid until the US command(normal-width mode) or CAN command is
	received.
	In the P-200 mode, this attribute will be reset to the normal width at the beginning of each
	line, every time the line is fed.
[See Also]	US, SO, SI
US	ALL
[Function]	Set Normal-Width Character
[Code]	<1F>H
[Outline]	This command resets the double-width character attribute and prints in normal width. The
	print data received after this command are printed as normal-width characters.
[See Also]	RS, SO, SI

41 CITIZEN