Citizen iDP3310 manual Esc O

	iDP3310 User's Manual
ESC C n	iDP-562
[Function]	Specify Page Length and Paging
[Code]	<1B>H<43H>(n)
[Range]	14 ≤(n) ≤140 (<30>H ≤ n ≤<39>H)
[Outline]	This command specifies a length of one page, which is determined by the number of lines. If
	the set number of lines is exceeded, this command will be ignored. The paper is fed by 3 lines
	immediately after specifying this command. This setting blanks the first and last three lines of
	the page (six blank lines in total). If n = 20 is set, the number of printable lines will be 14.
[Caution]	This command is ignored in the P-200 mode, P-250 mode, and P-900R mode.
[Default]	n = 66(66 lines per page)
[See Also]	ESC 0, FF
[Sample Program]	When setting the number of lines per page to 80
	ESC C 80 → LPRINT CHR$(&H1B)+"C"+CHR$(80);
	<1B>H<43>H<50>H
ESC O	iDP-562
[Function]	Cancel paging
[Code]	<1B>H<4F>H
[Outline]	Cancels paging operation. Normally, the first and last lines of each page are left blank. If this
	command is specified, however, those lines can be used as printable lines.
[Caution]	This command is ignored in the P-200 mode, P-250 mode, and P-900R mode.
[See Also]	ESC C, FF

48 CITIZEN