Citizen iDP3310 manual Print Control Functions, Commands List

iDP3310 User's Manual

10. PRINT CONTROL FUNCTIONS

10.1 Commands List

Command	Function	Code	P-250		iDP-562		Refer to
			P-200	P-250	40 ch	42 ch
LF	Line Feed	0AH					37
CR	Print	0DH	×	×			37
FF	Eject Paper	0CH					38
CAN	Clear Print Buffer	18H					38
	Cancel Character Attribute
NULL	Pad Character(NOP)	00H					39
DC2	Specify Underline	12H					39
DC3	Specify the Repeat Print	13H					39
FS	Execute P-250 Mode	1CH		×		×	40
GS	Execute P-200 Mode	1DH	×		×		40
RS	Set Double Width Character	1EH					41
US	Set Normal Width Character	1FH					41
SO	Set Double Width Character	0EH					42
	or specify High Page
SI	Set Normal Width Character	0FH					42
	or Reset Character code
BELL	Drawer Kick-out(D-type only)	07H					43
ESC a(n);	Set Line Height	1BH61H(n)3BH					43
ESC b(n);	Eject Paper by n lines	1BH62H(n)3BH					44
ESC c	Initialize	1BH63H					44
ESC d	Request Printer Status	1BH64H	×		×		45
ESC e(n);	Set Right Margin	1BH65H(n)3BH	×		×	×	45
ESC f(n);	Set Line Attribute	1BH66H(n)3BH					46
ESC g	Graphic Mode Activate	1BH67H	×	×	×	×	−
ESC h(n);	Select Character Set	1BH68H(n)3BH					46
ESC i	Identify Printer	1BH69H	×		×	×	47
ESC x	Select P-900R Mode	1BH78H					47
ESC C n	Set Page Length and Paging	1BH43H n	×	×			48
ESC O	Cancel Paging	1BH4FH	×	×			48
ESC * m nn	Specify Bit Image Mode	1BH2AH m n					49
ESC Y	Specify the Repeat Print	1BH59H					50

*P-250 represents both P-250 and P-900R modes.

P-250 mode basically equals to P-900R except the printer ID and some status sent to the host from the printer. Refer to the attached “Commands Details”.

*P-200 represents the P-200 mode.

*40ch and 42ch represents useable columns for iDP-562.

*(n) in the command indicates the character code 30h to 39h.

*: Command enable, ×: Command disable

*n m in the code indicates the character codes 00h to FFh.

34 CITIZEN