Insert the paper as shown in the figure. The printer will automati- cally pull the paper in to the printer and correct any skewed paper to ensure it is perfectly straight.
You can disable the skew correc- tion function using the control panel configuration as described in Chapter 5.
Using Tractor Paper
This printer feeds tractor paper from the rear of the printer to the front.
Set the power cord into the groove at the back of the lower case of printer to avoid it fouling the paper path.
To load tractor paper in to the printer, first turn the printer on.
Press the PARK/LOAD key to set the paper select lever to the tractor position as shown.
Note: You should NOT change this setting manually. Always use the control panel key.
- 14 -
