Chapter 6
Passbook Printing
Passbook Printing Configuration
To configure the printer to handle vertical passbooks, the following items in the control panel setup menu must be changed:
Head Gap This determines the operation of the media gap sensor. There are 5 options:
Auto One detects the paper thickness when the printer starts printing each page
Auto All detects the paper thickness on each line printed
Fix Pos Fixes the head gap to a particular value as determined by the “Gap Pos” value
Passbook1 is used for measuring the length of the passbook automatically
Passbook2 is used for presetting the length of the passbook using the “PB Length” value.
Gap Pos. This selects the fixed heap gap value when using the “Fix Pos” Head Gap.
PB Length This sets the fixed passbook length in values from 2 inches to 4 inches, in
Cross Page When enabled, causes the printer to increase the heap gap to the maximum value while the printer skips over the perforations between continuous paper sheets.
Skew Correct Enables or disables the shutter mechanism operation for straightening media not correctly inserted.
- 23 -
