Using Passbooks
Turn the printer on.
Then press the PARK/LOAD key to set the paper select lever at the
Note: You should NOT change this setting manually. Always use the control panel key.
Position the left hand guide in the
correct location for the size of paper being used.
Before inserting the passbook in to the printer, flatten it as shown in the figure below.
If the binding stitch area is projecting outward when the passbook is opened, flatten it using a pencil or similar as shown in the figure. This is to ensure the passbook is feed smoothly through the printer
and to avoid any damage to the printhead.
Note: Do not feed irregularly shaped passbooks nor passbooks who’s pages are covered in a smooth coating otherwise improper printing and damage may occur.
- 17 -
