English

TV Operation

Auto store function

Selecting the screen size

This function automatically stores a received broadcast as a preset channel.

1.Press the [P.LIST] button for 2 second or more. The broadcast stations are automatically stored in the memory in order starting from the currently received station.

2.To cancel, press the [P.LIST] button again.

Notes:

•Poor signal conditions might cause a channel with no station to be stored in the memory.

•Some stations might not be stored if their signals are too weak.

•When a station cannot be stored or a channel without a station was stored in the memory, refer to the following on the manual memory function, and redo the settings.

Store channels in the preset memory

Five screen size are supported: normal, wide, full wide, cinema1 and cinema2.

Note:

•The screen size cannot be selected while the vehicle is in motion.

1.Press the [WIDE] button to select the screen size.

Each time this button is pressed, the screen size changes in the sequence shown below.

■To view a normal 4:3 picture

The picture might sometimes appear distorted due to the mode that was set.

• FULL WIDE mode

 

• NORMAL mode

 

 

 

 

 

Entire picture is

Black borders appear on

stretched sideways.

the right and left.

1.

Press the [ENT] button to switch to the

 

preset memory mode. “PRESET MEMO” is

 

displayed on the top of the screen.

2.

Press the [A], [D] buttons to select a TV

 

channel you want to store as a presetting.

 

w z

• CINEMA1 mode

• WIDE mode

3.

Press the [ ], [ ] buttons to select a

 

preset channel to which the selected TV

 

channel is stored.

4.

Press and hold the [ENT] button for 2

 

seconds or longer to store in the memory.

The new channel currently received is stored in the memory.

Note:

•The memory is reset to initial settings if power is cut off such as when changing the battery.

To just hear audio (monitor off)

The picture is off the screen at top and bottom.

• CINEMA2 mode

The picture is slightly off the screen at top and bottom.

Note:

The picture at the left and right of the screen is stretched sideways.

1. Press the [MONI] button.

•The screen display turns off so you can enjoy just the audio.

•Press the button once again to return to the original state (screen display).

•If wide mode or full mode is used to view a 4:3 picture, it will fill the entire screen and parts of the picture will be off the screen or the picture will distort. If this happens use normal mode to view the image as originally intended.

12 TB851P/TB853W