Clarion TB851P, TB853W 3. CONTROLS, 4. PART NAMES, English Operating Buttons, LCD panel closed, LCD panel open

English	3. CONTROLS /		/
	LCD panel closed /	/

[OPEN/CLOSE]

4. PART NAMES

English Operating Buttons

Note:

•Be sure to read this chapter while referring to the front diagrams in chapter “3. CONTROLS” on page 5 (unfold).

LCD panel open / /

[OPEN/CLOSE] [SENSOR]

[ADJ]
[TILT]	[POWER]

[MONI]

[ENT]	[SRC]
[WIDE]	[CH.LIST]
[DISP]	[P.LIST]

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

[OPEN/CLOSE] button

•Use this button to open/close the LCD panel.

•Press and hold this button for about 2 seconds or longer so that the LCD panel is positioned horizontally when the LCD panel is open. Press the button again to return the panel to the original position. Even if this button is not pressed, the panel returns to the original position after about 10 seconds.

The unit angle and the operating time until return to original position can be set on “Set the LCD panel operating time”. (See page 17.)

[SENSOR]

• Remote control infrared sensor.

[POWER] button ( )

• Press this button to turn on/off the power.

[MONI] button

•Press this button to turn allow any moisture or liquid from items such as drinks or umbrellas to get on the unit.

[SRC] button

•Use to switch to a media source such as TV or

VISUAL.

[CH.LIST] button

•Displays a list of channels that can be received.

[P.LIST] button

•Displays a list of channels stored in the preset memory.

•Press and hold for 2 seconds or longer to perform the auto store operation.

[DISP] button

•Press this button to show the information on the screen.

[WIDE] button

• Press this button to switch the display sizes.

[ENT] button

•Use to enter the selected item in the unit memory when making settings.

•Press in TV mode to store as a preset station. Hold down button for at least 2 seconds to store the station.

[w], [z] buttons

•Press to select the preset channel.

•Press to select the desired menu on the adjustment menu screen.

[TILT] button

•Use this button to adjust the angle of the LCD panel in 5 steps.

•Each time this button is pressed and held for about 2 seconds or longer, the LCD panel moves forward/backward in 3 steps.

[A], [D] buttons

•Press to perform the Manual tuning.

•Press and hold for 1 second or longer to perform Seek tuning operation.

•Press to select the desired mode on adjustment menu screen.

[ADJ] button

•Shows the adjustment menu to change the settings.

5 TB851P/TB853W 6 TB851P/TB853W