
English
Operating with an external device
●Viewing video images1.Press the [SRC] button to select VISUAL1 or VISUAL2.
The setting shifts in the sequence shown below, each time the [SRC] button is pressed.
TV ➔ VTR1 ➔ VTR2 ➔ VISUAL1 ➔ VISUAL2 ➔ TV ➔ ...
Video from the external device connected to the video in terminal (visual input 1 or visual input 2) appears on the screen.
Notes:
•See the instruction manual of the external device to be connected to find out how to operate that external device.
•Video from external devices connected to visual input 1 or visual input 2 can be viewed on a rear monitor sold separately. To view on that rear monitor, connect the rear monitor to the VIDEO OUT (video output) terminal on this unit.
Viewing CCD camera images
Connect the CCD camera to this unit correctly
When the CCD camera is correctly connected to this unit and set, the following functions are activated.
•Automatically displays CCD camera images when the gear is set in reverse.
Note:
•Connect the reverse gear signal wire from the power supply box of the CCD camera to the positive (+) backlamp wire.
•A caution message appears during display of the camera images.
See “Setting the caution message for use during CCD camera operation”. (See page 18.)
14 TB851P/TB853W