Clarion TB851P, TB853W Select the FM modulator and RCA, Set the number of multiscreens (list, audio output levels, screen), Set the LCD panel angle (in airconditioning mode)

	Changing the settings (ADJUST mode)
Select the FM modulator and RCA	Set the number of multiscreens (list
audio output levels	screen)
∗ The factory setting is at “HIGH”.	∗ The factory setting is at “12”.

English

•In TV mode, the FM modulator output is at “HIGH”, even when set to “LOW” during TV mode.

•Not displayed during VISUAL mode.

1.Select “AUDIO LEV” on the ADJ_EXTERNAL screen.

2.Press the [A] or [D] button to select the “HIGH” or “LOW”.

•HIGH : Outputs signal at same level as the audio from the car radio.

•LOW : Lowers the output level to -6dB. (Set to LOW when audio is distorted when set at HIGH.)

Set the LCD panel angle (in airconditioning mode)

∗The factory setting is at “0°”.

1.Select “LIST” on the ADJ_OTHER screen.

2.Press the [A] or [D] button and select “8” or “12”.

Select the country (only on TB851P)

Setting the country name here, automatically sets the video standard and audio frequency band for that country.

Select the country name from:

• STANDARD	• AUSTRALIA
• CHINA	• HONG KONG
• NEW ZEALAND

1.Select “COUNTRY” on the ADJ_OTHER screen.

2.Press the [A] or [D] button and select the country.

1.Select “TILT” on the ADJ_HVAC screen.

2.Press the [A] or [D] button and select “0°”, “30°” or “50°”.

Set the LCD panel operating time (in airconditioning mode)

∗ The factory setting is at “10 sec”.

1.Select “TILT” on the ADJ_HVAC screen.

2.Press the [A] or [D] button to select “5sec”, “10sec” or “30sec”.

Set the beep tone used for button operation

The beeping sound heard when pressing the keys is called the beep tone.

∗ The factory setting is at “ON”.

1.Select “BEEP” on the ADJ_OTHER screen.

2.Press the [A] or [D] button and select “ON” or “OFF”.

TB851P/TB853W 17