Basic Operation
1.Hold down the [TILT] button and release it when a beep is heard.
The LCD panel slides forward or backward. This adjusted slide position is stored in memory.
∗There are 3 adjustable positions available on this panel.
Turning power ON or OFF
1. Press the [POWER] button.
Use to turn the power on or off.
Note:
•The LCD panel does not store away even if the power is turned off. If not using for a long period of time, press the [OPEN] (open/close) button on the LCD panel to store it away.
Select a media source
1.Press the [SRC] button. The source settings switch in the following sequence each time you press the button.
TV ➔ VTR1 ➔ VTR2 ➔ VISUAL1 ➔ VISUAL2 ➔ TV ➔ ...
•The media source you select appears on the screen (superimpose) for 7 seconds.
Housing the LCD panel
1.Press the [OPEN] button and the LCD panel is housed automatically.
Note:
•When leaving this unit unused for a long period of time or leaving your car, be sure to house the LCD panel into the main unit.
Turning the LCD panel horizontal (Air conditioner operation mode)
When the way the LCD panel is mounted hinders air conditioner operation, the panel can temporarily be turned to a horizontal position.
1.Press and hold the [OPEN] button when the LCD panel is upright, and release the button when a beep is heard.
2.The LCD panel turns horizontal.
∗Press the [OPEN] button again when the LCD panel is in the horizontal position, and the panel returns to the original position.
∗Alarm sounds and returns to original position if the button is not operated after about 10 seconds in horizontal state.
∗The unit can also be set so that the panel returns to its original angle after a preset time in the horizontal position (See page 17).
Changing settings on the TB851P model
The factory settings on this model may sometimes have to be changed according to usage conditions.
●Select the country (See page 17.)∗The factory setting is “STANDARD”.
●Changing the FM modulator frequency (See page 16.)∗The factory setting is “88.1 MHz”.
10 TB851P/TB853W