■Connecting the Accessories
• Connection to the CCD camera for vehicle
For detailed information, refer to the instruction sheet or manual for the CCD camera.
Notes:
•A power supply box (sold separately) is required for connecting the main unit and the CCD camera.
•The power supply box for camera CAA147 cannot be used. Please use the CAA188 instead.
English
■Connect the parking brake wire
Connect the parking brake wire (supplied with unit) from this unit to the parking brake lamp ground wire in the dashboard panel. Use the electrotap (comes supplied with this unit) when making the connection.
•Connecting this parking brake wire to the ground of the lamp allows you to watch video on this unit when the parking brake is on.
•No TV images will appear unless you connect this parking brake wire as shown below.
Parking brake lamp wire
Electrotap
wire Parking brake wire from this unit (grass green)
Parking brake
1.Press the parking brake wire (orange) from this unit against the (opened) stopper and fold the stopper towards the arrows as shown.
Vehicle parking brake lamp ground wire
Latch
Parking brake
Stopperwire from this unit
2.Lay the vehicle wire as shown and fold the stopper towards the arrows.
Vehicle parking brake lamp ground wire
Tighten with | Parking brake |
pliers or similar tool until | wire from this |
the latch engages | unit |
TB851P/TB853W 27