English

Changing the settings (ADJUST mode)

Adjust the screen image quality

Rear monitor lock

Screen image quality

Adjust the screen luminance, brightness, hue and color level to view video at your own preferred image quality.

•You can only make this adjustment in TV/VTR/ VISUAL modes while the vehicle is stopped.

∗ The factory setting is at “OFF”.

1.Select “MONILOCK” on the ADJ_EXTERNAL screen.

2.Press the [A] or [D] button to select ON or OFF.

•Only the screen luminance and brightness can be adjusted in modes other than TV/VTR or when driving in TV/VTR mode.

•Only the screen luminance and brightness can be adjusted during an interrupt (break-in) by the rear camera.

●DIMMER adjustment

Switching the FM modulator audio output (only on TB851P)

FM modulator is a system for temporarily converting audio signals on this unit to FM signals and playing them back as FM stereo on the car audio radio section.

∗The factory setting is at “ON”.

1.Select “DIMMER” on the ADJ_MONITOR screen.

2.Press the [A] or [D] button to adjust the dimmer.

•A: Darkens the screen

•D: Brightens the screen

●BRIGHT adjustment

1.Select “BRIGHT” on the ADJ_MONITOR screen.

2.Press the [A] or [D] button to adjust the brightness.

•A: Lowers the screen luminance.

•D: Increases the screen luminance.

●COLOR adjustment

1.Select “COLOR” on the ADJ_MONITOR screen.

2.Press the [A] or [D] button to adjust the color.

•A: Decreases the color density.

•D: Increases the color density.

●HUE adjustment

1.Select “HUE” on the ADJ_MONITOR screen.

2.Press the [A] or [D] button to adjust the hue.

•A: Adds green.

•D: Adds red.

Note:

•Can be adjusted on the NTSC system. Cannot be adjusted on PAL system.

1.Select “MONILOCK” on the ADJ_EXTERNAL screen.

2.Press the [A] or [D] button to select ON or OFF.

•ON : To use the FM modulator to output stereo sounds from car radio peaker.

•OFF : If not using the FM modulator.

Changing the FM modulator frequency (only on TB851P)

∗ The factory setting is at “88.1MHz”.

1.Select “MODUFREQ” on the ADJ_EXTERNAL screen.

2.Press the [A] or [D] button to select the FM modulator frequency.

• Settable frequency range is 88.1 to 89.9MHz. Frequencies outside this range cannot be set.

16 TB851P/TB853W