Operating with an external device

To view video images:

●How to connect to video

Use the VTR mode to transfer output audio or images such as video.

Video out/VTR input cable CCA-623-500 (sold separately)

Black

Black

Black

Gray

White

Red

Yellow

Yellow

Left Right

 

 

 

To video

To audio

OUT terminal

OUT terminal

 

●Select the video mode

1.Press the [SRC] button to select VTR1 or VTR2. The setting shifts in the sequence shown below, each time the [SRC] button is pressed.

TV ➔ VTR1 ➔ VTR2 ➔ VISUAL1 ➔

VISUAL2 ➔ TV ➔

Notes:

•See the instruction manual for the connected device to learn how to operate the video equipment.

•Press the [SRC] button to return to TV mode.

To view other images:

●Connecting to other video

Video images from external devices can viewed on this unit by connecting the video output terminals on the external device to the video in terminals (visual input 1 or visual input 2) on this unit.

Notes:

•Always turn off the power on this unit and the external devices when connecting.

•Before connecting, always check the instruction manual of the device for connection.

•To ensure driving safety, video images will not appear on the screen while the vehicle is moving. The VTR images are viewable only when the vehicle parking brake is engaged.

•Audio cannot be heard in VISUAL mode.

English

Video (video camera) etc.

Notes:

•Always turn off the power on this unit and the video (video camera, etc.) when connecting.

•Before connecting, always check the instruction manual of the device for connection.

•To ensure driving safety, just as with the TV images, even when the VTR is connected, video images will not appear on the display while the vehicle is moving and only the sound can be heard. The VTR images are viewable only when the vehicle parking brake is engaged.

•Video from external devices connected to VTR1 or VTR2 can be viewed on a rear monitor sold separately.

TB851P/TB853W 13