Clarity E814 Call from the CID, Call from the Redial List, Temporary Tone Dialing, Chain dialing

using your cordless handset

(Purchased Separately)

Call from the CID

1.In idle mode, press <DOwn> to access the CID. Alternatively, press <MENU/ SELECt> to access the CID from the main menu.

2.Press <UP/DOWn> to select the desired CID entry.

3.Press <TALK ON / FLASH> or <SPEAKER> to dial out to the selected entry.

Call from the Redial List

1.In idle mode, press <RD/P> to access the redial list.

2.Press <UP> or <DOwn> to select the desired redial number.

3.Press <TALK ON/FLASH> or <SPEAKER> to dial out to the selected number.

Note: Your handset automatically times the duration of every call. The call timer will display a few seconds after the call has been made. It is shown in hours, minutes and seconds format.

Temporary Tone Dialing

If you have pulse (rotary) dialing service only, you can temporarily switch from pulse to touch-tone dialing during a call.

During a call, press <*>. Buttons pressed after this send touch-tone signals. The tele- phone automatically returns to pulse dialing mode after you end the call.

Answer a Call

1.When the phone rings, press <TALK ON / FLASH> to use the earpiece

–OR–

2.Press <SPEAKER > to use the speakerphone.

End a Call

1.During a call connection on handset, press <TALK OFf/ CLEAr> to end the call.

–OR–

2.Put the handset on the base station to end the call.

Chain dialing

This feature allows you to initiate a dialing sequence from numbers stored in the directory, CID or redial list while you are on a call.

47