Appendix C ~ Serial Commands

31

TAMODE

This command controls or reports the Telephone Adapt Mode control of the unit.

Command form: TAMODE <X>

Explanation

Value

0

= Sets Telephone Adapt Mode to Auto

 

1

= Sets Telephone Adapt Mode to Burst

 

Null = Reports back the current state

Return value

The command returns the updated connection state of the unit in the same format as

the command.

TE

This command controls or reports the connection status of the unit.

Command form: TE <X>

Explanation

Values

0

= Sets the unit to disconnect from the line

 

1

= Sets the unit to connect to the line

 

2

= Toggles the states

 

Null = Reports back the current state

Return value

If the current state is On, the following is returned: TE 1. If the current state is Off,

the following is returned out the serial port: TE 0

TERL

This command reports back the telephone echo return loss (TERL) for the GT1524

in decibels. Command form: TERL

Example

If the current TERL level is 10dB, the following is returned out the serial port:

TERL 10

TERLE

This command reports back the telephone echo return loss enhancement (TERLE)

for the GT1524 in decibels. Command form: TERLE

Example

If the current TERLE level for the telephone canceller is 20dB, the following is

returned out the serial port: TERLE 20

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

Page 36
Image 36
ClearOne comm GT1524 operation manual Tamode, Terle