8 | Installation ~ LCD Programming |
The | three | terminals in | |
✍ the | Phoenix | connector | |
correspond | with | the rear- | |
panel audio contacts (from left to right): + (positive), – (negative), and (ground).
Figure 2.3. Phoenix push-on connector
5.Use the
6.Connect an external amplifier or sound reinforcement system to Line Out. Use Aux Out to connect recording equipment, such as a VCR. Nominal output is 0dBu.
7.Using the included connectors, wire a
8.Connect a local microphone or input from a local sound system or mixer to Mic/Line In.
9.Connect the speaker wire to the + (red) and – (black) binding post connectors.
10.Connect the power cable after making all other connections. As soon as power is supplied to the unit, the GT1524 initializes and all
ClearOne GT1524
Version x.x
Inputs
Outputs
System
Meter
Figure 2.4. Main Menu Trees
LCD Programming
For most installations, the default settings in the GT1524 do not need to be changed; the system can be used as soon as power is applied. However, if you need to customize any settings, such as telephone connection options or input parameters, you can do so through the front panel user interface.
The front panel includes a 2x16 character LCD, menu buttons, and LED bar meter. When power is applied to the GT1524, all LEDs light and the LCD panel reads INITIALIZING. If initialization is completed without errors, a title screen appears, showing the product name (top line) and the version number (bottom line). The title screen remains on display until you initiate some action that writes information to the LCD panel or the GT1524 detects and displays an error. If an error is displayed, contact ClearOne Technical Support.
Menu trees
Four main menu trees (menu categories) comprise all of the GT1524 options you can control through the front panel: Inputs, Outputs, System, and Meters (see Figure
2.4). Enter each of the trees by pressing the up/down buttons and scrolling to the
