Chapter 4: User Options
PROGRAMMING OPTIONS
To allow for individual preferences and enhance ease of use, the following features can be programmed: DHCP, host IP, subnet mask, default gateway IP address, ringer melody, VLAN on/off, help line number, and AGC/ALC. You can also restore factory defaults.
To Change Dynamic Host Configuration Protocol (DHCP)
1.Press and hold the REDIAL/PROG key until the Program icon appears on the LCD screen (see figure 4.1)
Figure 4.1 MAX IP Response Point LCD Program icon
2.Press 1 to enter the DHCP menu. There are two options: 1 - enable DHCP; and 0 - disable DHCP.
3.Press REDIAL/PROG. The current DHCP setting will flash.
4.Press keys 1 or 0 to enable or disable DHCP.
5.Press REDIAL/PROG to save the selection; a confirmation tone will play. Press CLEAR to exit programming.
6.The phone will reboot.
To Change Host IP Address
Press and hold the REDIAL/PROG key until the Program icon appears on the LCD screen (see figure 4.1). Note: DHCP must be disabled in order to change the host IP address manually.
1.Press 2 to enter the Host IP Address menu. The current host IP address will be displayed.
2.Press REDIAL/PROG. The current host IP address will flash.
3.Press and hold CLEAR to erase the current host IP address.
4.Using the number keys, enter the desired host IP address.
5.Press REDIAL/PROG to save the selection; a confirmation tone will play. Press CLEAR to exit programming mode.
6.The phone will reboot.
To Change Subnet Mask
1.Press and hold the REDIAL/PROG key until the Program icon appears on the LCD screen (see figure 4.1). Note: DHCP must be disabled in order to change the subnet mask manually.
2.Press 3 to enter the Change Subnet Mask menu. The current subnet mask will be displayed
3.Press REDIAL/PROG. The current subnet mask will flash.
4.Press and hold CLEAR to erase the current subnet mask.
10 Technical Services:
