5.Using the number keys, enter the desired subnet mask.
6.Press REDIAL/PROG to save the selection; a confirmation tone will play. Press CLEAR to exit programming mode.
7.The phone will reboot.
To Program a Default Gateway IP Address
1.Press and hold REDIAL/PROG until the Program icon will appear on the LCD screen (see figure 4.1). Note: DHCP must be disabled in order to change the subnet mask manually.
2.Press 4 to enter the Default Gateway IP Address menu. The current default gateway IP address will be displayed.
3.Press REDIAL/PROG. The current default gateway IP address will flash.
4.Press and hold CLEAR to erase the current default gateway IP address.
5.Using the number keys, enter the desired default gateway IP address.
6.Press REDIAL/PROG to save the selection; a confirmation tone will play. Press CLEAR to exit programming mode.
7.The phone will reboot.
To Program the Automatic Gain Control (AGC) and Automatic Level Control (ALC) Settings
1.Press and hold the REDIAL/PROG key until the Program icon appears on the LCD screen (see figure 4.1).
2.Press and hold the 8 key. The current AGC setting number will be displayed on the LCD screen.
3.Press REDIAL/PROG. The current setting number will flash.
4.Enter a new setting number using the table shown in figure 4.2.
Setting | Speaker AGC | Microphone ALC |
1 | On | On |
|
|
|
2 | On | Off |
|
|
|
3 | Off | On |
|
|
|
4 | Off | Off |
|
|
|
Figure 4.2 MAX IP Response Point gain control table
5.Press REDIAL/PROG to save the selection; a confirmation tone will play. Press CLEAR to exit programming mode.
To Restore Factory Defaults
1.Press and hold the REDIAL/PROG key until the Program icon will appear on the LCD screen (see figure 4.1).
2.Press and hold the 9 key. The number 8 will repeat across the LCD screen.
3.Press REDIAL/PROG to save the selection; a confirmation tone will play. Press CLEAR to exit programming mode.
4.The phone will reboot.
11 Technical Services: