Clover Electronics MVR1020 instruction manual Raw Data Backup, To play

6-3. Raw Data Backup

Raw Data Backup is to save all the recorded data or partial data that stored in CF Card in your PC.

-Click the USB device (CFCard) on the upper right hand corner of the CFCard Viewer to select (See Section 6-2 for more details).

-Click the Raw Data Backup button shown in Fig.6-17 if you wish to save all the recorded data in your PC, and then the saving progressive bar along with percentage will appear as shown in Fig.6-18.

-If you wish to save a part of the whole recorded data, select the starting time by clicking on the yellow bar that represents the whole recorded data as shown in Fig.6-19 and set the ending time by right-clicking on it (See Fig.6-20), and then click the Raw Data Backup button.

-The recorded data will be saved in the CFCard_DVR_BK folder (C:\CFCard_DVR_BK).

-To play,

▪Click the “Raw Data Open” in Fig.6-17, and then the Raw Data Backup Files will be displayed (See Fig.6-21).

▪Click one of the files, and then click “Open” button in Fig.6-21.

▪Click the button to playback.

Fig.6-17 Raw Data Backup/Open button

Fig.6-18 Saving progressive bar

- 42 -