Clover Electronics MVR1020 instruction manual Alarm & Motion Recording

5-5-3. Motion Recording

The system will automatically start recording only when motions of object are detected.

-Setup the AREA (motion area) in the MOTION/ALARM menu (See section 5-4-4 for more details).

-Press REC button on the front panel or the remote controller.

5-5-4. Alarm & Motion Recording

Refer to section 5-5-2 and 5-5-3.

-Fig.5-12 shows that any of alarm or motion detection is not activated and the icons in white on the bottom of screen are displayed.

-Fig.5-13 shows that alarm and motion are activated and the icons in red on the bottom of screen are displayed.

Fig.5-12 Manual Recording Icon

Fig.5-13 Alarm/Motion Recording Icon

- 29 -