23
Mode Functions
22
VibrAlert®andCallAlert •
YourmicroTALK®radio can alert you to incoming signals by
soundingan audible call tone, by vibrating silently or both.
Tochange call settings:
1.Press the Mode button
untilthe Call Setting icon
flasheson the display.
Thecurrent setting (“01”
vibrate+ ring, “02” vibrate
onlyor “03” ring only)
isdisplayed.
2.Press the ChannelUp or
ChannelDownbutton to
changethe call setting.
3.Choose one of thefollowing:
a.Press the Mode button
toenter the new setting
andproceed to other functions.
b.Press the Lock/Enter button to enter the
newsetting and return to Standby mode.
Operation CustomerAssistance WarrantyIntroduction Operation
Duringmemory location scan (while receiving an Incoming
transmission),you can choose from the following:
a.Press and hold the Talk button to communicate on that
memorylocation.
b.Your radio will remain on that memory location and return to
Standbymode. Press the ChannelUp or ChannelDown button
toresume scanning memory locations.
c.After 10 seconds of inactivity, unit starts scan again.
Ifyou press the Talk button while scanning, but more than
10seconds after receiving a transmission, you will transmit on
thememory location on which, during scanning, you last received
atransmission.
Ifyou do not press any button within 10 seconds, your radio
willautomatically resume scanning memory locations.
Duringmemory location scan (while not receiving a
transmission),you can choose from the following:
a.Press and hold the Talk button to communicate on the
channel/privacycode that was displayed before you entered
modefunctions or memory location on which, during
scanning,you last received a transmission.
b.Press the Mode button to proceed to other functions.
c.Press the Lock/Enter button to return to Standby mode
onthe channel/privacy code that was displayed before you
enteredmode functions or the memory location on which,
duringscanning, you last received a transmission.
Toreduce the number of memory locations being scanned,
youmay de-program any unwanted locations. (See page 16
tode-program a memory location.)
ChannelButtons
VibrAlert®+Ring
VibrAlert®Only
RingOnly
ModeButton