GETTING STARTED
The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the infrared remote sensor during opera- tion. The sensor may not be able to receive signals properly if the sensor is covered, if there is a large object between the remote control and the sensor, or if it is exposed to direct sunlight or a strong artificial light (e.g., fluorescent or strobe lights). If possible, change the position of the light source or reposition the unit to avoid direct lighting.
Remote Control Battery Installation
• Refer to the diagram. Remove the battery compartment cover located on the rear of the remote control. In- sert batteries, making sure to match their polarities
• To use the remote, point it at the remote sensor of the player. Oper- ate the remote within 15 feet of the sensor and at an angle of +/- 60 de- grees.
•Batteries in the remote will last for
approximately 1 year. Replace the batteries if the remote control does not work. Do not mix old with new batteries, or different types of batteries.
•Remove the batteries from the remote if it will not be used for a long period of time.
The batteries used in the remote control may present a fire or chemi- cal burn if mistreated. Do not recharge, disassemble, incinerate, or heat the battery (~212°F).
Keep batteries away from children.
Page 14 | Coby Electronics Corporation |
|
|
