Cognitive Solutions EZLP-UG00000 user manual Printer Installation, Setting up the EZ-LP Printer

Chapter 2: Printer Installation

Setting up the EZ-LP Printer

Connecting the Interface and Power Cables

IMPORTANT! PRIOR TO CONNECTING ANY INTERFACE CABLE AND POWER CABLE TO PRINTER, MAKE SURE PRINTER IS OFF.

POWER OFF

1.Make sure power switch is OFF

2.Connect power cable to AC adapter

3. Connect the AC adapter to the power	4. Plug the power cable into an AC
connector on the printer	outlet

5.Connect the interface cable to the rear of the printer. For Serial or Parallel cables, securely fasten the interface connector screws or clips.

NOTE: EZ-LP IS

CONFIgured to use standard straight- through serial cable when using the com/ser port to connect to a dte device such as a computer.

USB

Power OFF

USB-B

(Device)

ETHERNET

Power OFF

Ethernet

I O I O	COM/SER
Power OFF
	Serial
	(DB9)
	PARALLEL
	Parallel
	(Centronics)

Power OFF

Ferrite Bead

(Install on Parallel Cable as Shown)

7