The
Parameter | Default Setting |
|
|
Programming Language | Auto (automatically detects and sets to |
| EcPL or ZcPL) |
Speed | 5 ips (127 mm/s) |
|
|
Label Width | 432 (4.32 inches or 110 mm) |
|
|
Label Length | Measure label (automatically measures |
| and sets label length at power up) |
|
|
Indexing Type | Gap |
|
|
Reference Point | 0,0 (upper left corner) |
Auto Top of Form | On |
|
|
Enable Label Present | On |
|
|
Advance Label | 25 (0.25” or 6.4 mm) |
Retract Label | 25 (0.25” or 6.4 mm) |
|
|
Delay Time (Retract Label) | 0 seconds |
|
|
Serial Port Settings | 9600 bps, 8 bit data, 1 stop bit, no parity |
(serial port printers only) | (DCE configuration - use |
| cable) |
Settings below only apply to printers with Ethernet | |
Printer IP Address | 10.0.0.12 |
|
|
Net Mask | 0.0.0.0 |
Gateway | 0.0.0.0 |
DHCP | On |
|
|
LPD | On |
RTEL | On |
|
|
RTEL Port Number | 9100 |
|
|
30
