8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 21

4Carry handle should be kept in the carry position (see “Carry Handle Operation” section).

5Adjust recline using recline indicator on the side of car seat. Line on recline

indicator MUST be in green striped zone (fig. d).

If line is not in green striped zone, adjust base using the recline foot (see “Base Adjustment” section), and recheck recline of car seat. Repeat until recline indicator is in green striped zone.

If base can not be adjusted to locate the line in the green

 

(fig. d)

striped zone:

Green

 

1.

Try a different seating position.

 

Striped

 

2.

Do not use this infant car seat.

Zone

Recline

 

 

 

NOTE: Vehicle must be parked on flat, level surface during this installation.

Indicator

Line

6Verify that LATCH belt or vehicle seat belt is still tightly adjusted around base.

20

Page 21
Image 21
Combi 8040 instruction manual Striped, Zone Recline Indicator Line