Combi 8040 instruction manual Removal Of Base Installed With Latch, Fig. a

8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 26

25

12Attach car seat to base.

13Recheck recline of car seat. Adjust if necessary (see step 8).

Removal Of Base Installed With LATCH:

1Loosen lower anchor belt:

2

3

-While pressing down in center of base to reduce tension on lower anchorage belt, push adjuster release button and loosen belt.

Remove lower anchor connector:

-Press and hold the red release button.

-Pull the connector off the vehicle anchorage bar (fig. a).

Repeat to remove connector on opposite side.

(fig. a)