Combi 8040 instruction manual Green, Striped Zone

8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 24

23

7Place base rear-facing in the vehicle seat location selected with blue lap belt guides toward vehicle seat back and centered between the vehicle lower anchors (fig. d).

Attach car seat to base.

8Adjust recline using recline indicator on the side of the car seat. Line of recline indicator MUST be in green striped zone (fig. e). If line is not in green striped zone, adjust base using recline foot (see “Base Adjustment” section), and recheck recline of car seat. Repeat until recline indicator is in green striped zone.

If base can not be adjusted to locate the line in the green striped zone:

1.If necessary, place tightly rolled towel, pool noodle, or firm object under recline foot to level car seat.

2.Try a different seating position.

3.Do not use this infant car seat.

NOTE: Vehicle must be parked on horizontal surface

during this installation.
9 Remove car seat from base.	Green
	Striped Zone

(fig. d)

(fig. e)

Recline

Indicator