![](/images/new-backgrounds/1290811/29081161x1.webp)
8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 31
7Tighten vehicle belt to secure the base. Press down in center of base to depress the vehicle cushion while tightening vehicle belt (fig. e & f).
-When using a vehicle lap and shoulder belt, after tightening lap portion of the belt, place shoulder belt into slot in corner of base and allow shoulder belt to rest against vehicle seat back (fig. g).
8Check for secure installation. Pull base front to back and left to right to check for secure installation (fig. h). Vehicle lap belt MUST stay tight.
9If the vehicle lap belt does not stay tight or base cannot be securely installed, see vehicle owner’s manual, “Vehicle Seat Belts” section or move to a different seating location.
10Attach car seat to base. Lift car seat to ensure it is properly attached to the base (see “Attachment Of Car Seat To Base” section).
11Recheck recline of car seat. Adjust if necessary
(see step 4). | 30 |
|
Lap Belt | Lap and |
| Shoulder Belt |
(fig. e) | (fig. f) |
(fig. g) | (fig. h) |