8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 41
Changing Shoulder Harness Slot Position:
1.Buckle Harness and chest clip.
2.Loosen harness straps, (see “Harness Use And Adjustment” section).
3.From back of car seat unhook both harness loops from metal harness plate (fig. b).
4.From front of car seat, pull harness straps out through infant insert, seat pad, and car seat shell.
Metal 
Harness Plate
(fig. b)
5.From front of car seat, rethread harness straps through infant insert, desired harness strap slots of seat pad, and seat back.
Make sure harness straps are not twisted and are threaded through matching slot of infant insert, seat pad and seat back.
6.From back of car seat, route shoulder straps between plastic seat and metal rod, then
Shoulder
Harness
Loops
(fig. c)
Check that loops are completely in slots of metal |
|
|
harness plate and under tabs on both sides. | Tab | Metal |
40 |
| Harness Plate |
