Combi 8040 instruction manual Down over outside of blue belt guide 4 fig. d

8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 30

29

6 Route vehicle lap belt through base.

1

a. Starting on side of base where lap belt is attached to vehicle, route belt up over outside of blue belt guide 1 , into belt slot, down the outside of the base and across the bottom of the base to the opposite side 2 (fig. c).

b.	On opposite side of car seat, thread vehicle lap belt up between base 3	2
	and blue belt guide and place lap belt into belt slot on blue belt guide	(fig. c)
	and down over outside of blue belt guide 4 (fig. d).
c.	Buckle belt.
d. Check that vehicle lap belt is not twisted and lays flat across bottom of		4
	base.

NOTE: When installing with a lap and shoulder belt, route only the lap belt

through the base, DO NOT route the shoulder belt through base.

3

(fig. d)