DVD films can only be viewed on one display at a time. If two or more displays are active (Notebook display plus TV, for example), the film will show as a black box or blank screen on one of the displays. This

is normal.

Press and hold the Fn key while pressing the F3 key to switch the display from your Notebook to the TV.

Playing a DVD Film on a TV

Set up your TV-Out connection following the procedures in the “Common Tasks” chapter of this guide.

1.Once your TV-Out connection is properly set up, start the DVD player by one of these methods:

Insert a DVD disc into the drive. After a few seconds, the Compaq DVD Player control panel opens and playback begins.

If the disc is already inserted in the DVD drive, press the Play ˆ button on the status panel on the front of your Notebook. The Compaq DVD Player control panel opens and playback begins.

2.Press the Fn+F3 keys to switch the display from your Notebook to the attached TV.

Note: You may need to press Fn+F3 more than once to transfer the image to the TV. Refer to “Switching Between Displays” in the “Common Tasks” chapter of this guide for more information.

3.You can switch the display from the TV back to your Notebook at any time by pressing Fn+F3 again.

5-12 USING THE CD OR DVD DRIVE

PRESARIO NOTEBOOK BEYOND SETUP GUIDE

 

1800 SERIES

Page 60
Image 60
Compaq 1800 manual Playing a DVD Film on a TV