Compaq 6500 Family manual Installing Memory

Memory Upgrades

4.Align the notch in the 3.3v SDRAM memory module with the plastic tab in the memory cradle (Figure 5-2, step 1).

5.Install the memory module by inserting it at an angle of approximately 45 degrees into one of the two sockets (Figure 5-2, step 2).

6.Gently press the module down until it snaps into place (Figure 5-2, step 3).

7.Replace the memory compartment cover and press around the edges to make sure it is properly seated.

DEC01609

Figure 5-2 Installing Memory

5-3