4.7Power Button
1. Prepare the computer for disassembly (Section 4.2).
WARNING: Power is continuous to the system board and power supply even when the power switch is turned off. To prevent damage to the unit, disconnect the power cord from the power source or the unit before beginning disassembly procedures.
2.Lay the computer down on its large base for greater stability.
3.Remove the access panel (Section 4.5).
4.Remove the front bezel (Section 4.6).
5.Pinch the two tabs of the power button together and pull the button out of the front bezel. The spring will follow the button out of the housing.
To replace the power button, reverse the above procedure.
Compaq Deskpro EX and Deskpro EXS Series of Personal Computers
