Compaq EX Series, EXS Series specs

4.13.3GPA/AIMM Card with a Type 2 Retention Mechanism

Removing a GPA/AIMM Card

1.Prepare the computer for disassembly (Section 4.2).

2.Lay the computer down on its large base for greater stability.

3.Remove the access panel (Section 4.5).

4.Pull the arm on the right side of the retention mechanism.

5.Pull the card straight up to remove it from the expansion slot.

To install the graphics card, reverse the above procedures.

4-26Removal & Replacement Procedures

Image 53

Compaq EX Series, EXS Series manual 13.3 GPA/AIMM Card with a Type 2 Retention Mechanism

Contents

Maintenance & Service Guide Maintenance & Service Guide Maintenance & Service Guide Contents Removal and Replacement Procedures Specifications Technician Notes Symbols and ConventionsAbout this Guide Locating Additional Information Product Description Chapter Component/Function Computer FeaturesFront Panel Controls and LEDs Component Rear Panel Connectors Drive Positions Reference Drive Bay Configuration Serial Number Location Spare Parts System Unit Spare Part Warranty Description Number Tier Mass Storage Devices Cables Standard, Memory, and Expansion Boards Miscellaneous Plastics Kit Miscellaneous Screw Kit not illustrated Keyboards not illustrated Shipping Boxes not illustrated Miscellaneous Parts not illustratedDocumentation and Software not illustrated Description Spare Part Number Electrostatic Discharge Information Removal & Replacement PreliminariesGenerating Static Relative Humidity Event 55% 40% 10% Personal Grounding Methods and Equipment Preventing Electrostatic Damage to EquipmentGrounding Workstations Method Voltage Recommended Materials and Equipment General Cleaning Safety PrecautionsRoutine Care Cleaning the Monitor Cleaning the Computer CaseCleaning the Keyboard Cleaning the Mouse Service ConsiderationsPower Supply Fan Tools and Software Requirements Hard Drives Cables and ConnectorsLithium Coin Cell Battery Disassembly Sequence Chart Removal and Replacement Procedures Disassembly Preparation Feet Installation Cable Lock Access Panel Front Bezel Power Button Subpanel and Bezel Blanks Power Switch Assembly Drive Positions Using the Cable-Select Feature with Ultra ATA Devices Removing an Internal 3.5-Inch Hard Drive Removing an External 5.25-Inch Drive Removing an External 3.5-Inch Drive Page Expansion Board Slots Expansion Boards Removing a PCI Expansion Board Installing a PCI Expansion Board Page DIMMs Memory Module InstallationSystem Memory Page Graphics Cards Installing a GPA/AIMM Card 24Removal & Replacement Procedures Removing an AGP Card AGP Card with a Type I Retention Mechanism 13.3 GPA/AIMM Card with a Type 2 Retention Mechanism AGP Card with a Type 2 Retention Mechanism Standard AGP Expansion Card Processor 30Removal & Replacement Procedures System Board Battery Chassis Fan Assembly Power Supply Connectors and Jumpers Connectors and Jumpers Clearing Cmos Disabling or Clearing the Power-On and Setup Passwords Definition Seagate Quantum Western Digital Hard Drive Jumper SettingsSeagate, Quantum, and Western Digital Definition J50 J48 J46 J44 J42 Maxtor System SpecificationsSpecifications System DMA System InterruptsHardware IRQ System Function Hardware DMA System Function Port Register Name ICH Fixed I/O Registers ICH Fixed I/O Registers Port Register Name Size Memory Address System Function System Memory Map MB Diskette Drive Drives 10.0 GB 15.0 GB Ultra ATA Hard Drives 48X Max CD-ROM Drives Scroll Mouse Compaq Keyboard Color Depth Mode Bits/pixel Refresh Rate Hz Supported Graphics ResolutionsIntel 3D Graphics NVIDIA M64 Pro Index 2Index