Removal and Replacement Procedures

To remove the front I/O system fan module:

1. Disconnect the I/O fan cable from the system board (2). Refer to Figure 2-13.

2

1

Figure 2-15: Removing the system I/O fan module

2.Loosen the thumbscrew securing the I/O fan module to the chassis (1).

3.Carefully lift the I/O fan module out and away from the chassis (2).

To replace the I/O fan module, reverse steps 1 through 3.

2-18

Compaq ProLiant ML350 Generation 3 Server Maintenance and Service Guide

Page 32
Image 32
Compaq ML350 manual Removing the system I/O fan module