Removal and Replacement Procedures

Bezel (Rack Model Only)

To remove the bezel:

1.Complete the preparation procedures. Refer to “Preparation Procedures” earlier in this chapter.

2.Loosen the thumbscrews holding the chassis in the rack (1).

3.Fully extend the chassis from the rack.

1

Figure 2-3: Loosen the thumbscrews holding the chassis and fully extend the chassis from the rack

2-8

Compaq ProLiant ML350 Generation 3 Server Maintenance and Service Guide

Page 22
Image 22
Compaq ML350 manual Bezel Rack Model Only